English
한국어
All-In-One under Sink Water Purifier P-160AL
Under the sink RO Filtration
Filter Life
Sedi 5,20μm : 6 Months
Neo-sense : 6 Months
Nanotrap : 24 Months
Inno-sense : 6 Months
Flow rate/ Production Rate
40 gpd (189.2 lpd)
Net Weight
14.3 lb (6.5 kg)
Dimensions(W X D X H)
9.25 X 13.75 X 16.5 inch (235 X 350 X 419 mm)
Feed Water Pressure
40~120psi (275kPa~827kPa)
Feed Water Temperature
41℉~95℉ (5℃~35℃)
Tank Capacity | Ambient
1.58 gal (6 l)
Experience Coway’s new all-in-one under sink water filter system.
The combined filter and tank design declutters under sink storage.
Easily manage filters yourself with Coway Self Service.
The start of clean and delicious water, Coway Intensive RO1.0 filter system
RO 1.0 filter
Intensive active dense layer
Intensive coiling
delivers rich capacity of purified water with up to 24 % more dense coiling
1 Target substance and size: sulfate ion / 0.4 nanometer. The inspection result (water purifier performance evaluation based on KC mark) of the “Ministry of Environment Notification of Designating Standards, Specifications and Inspection Agencies for Water Purifiers” by Korea Environment Water Works Institute or Korea Conformity Laboratories, a water purifier performance testing agency, in pursuant to Article 43 of Law for the Management of Drinking Water. The performance of the product was evaluated at a pressure of 3.5kgf/cm2 on the product inlet after adding 400mg/L of tap water and sulfate ion to the tank. The removal rate was calculated after sampling and analyzing sulfuric acid ions at the end of extraction (70% based on the acceptable removal rate). As of March 2017, the sulfuric acid ion removal efficiency of the selective purification performance certificate for Coway RO water purifier currently on market in Korea: 93~100%
2 Measurement and comparison of effective membrane area of the in-house general/low-pressure RO membrane filters (RO 1.0 filters): Low-pressure RO filter is wider (18~24%) than general RO filter. Filters measured: General RO membrane filter (11,14 inches), low-pressure RO membrane filter (11,14 inches)
Substances purified by RO 1.0 filter system
3 Removal rate of 15 remnant pharmaceuticals and endocrine disruptors in the WQA performance test based on NSF/ANSI 401 standard: (95.1~98.8)%, Coway Plus Innocence Filter
(8/11/14 inches) only as of March 2017
4 The items that overlap between the nanotrap filter and RO 1.0 filter system based on the WQA performance test of the NSF/ANSI 42 standard are “taste/odor”. The nanotrap is certified for class 1 particulate matter and the RO 1.0 is certified for TDS and hardness.
* Slight deviation may occur depending on the filter and use environment such as concentration, temperature, and pressure of raw water.
* Actual filter appearance may vary by product.
* The number of validated purification performance items for each filter mentioned above is based on the Korea Water Mark, overseas WQA NSF/ANSI 42, 53, 58 and 401 certificates and Noroven certificate.
* The classification and name of each category are denoted on the basis of the company standards.
Coway provides most reliable filter system for every filter to be certified by WQA
Most reliable system for every filter to be certified by WQA
Neo-sense
Drinking Water Treatment Units – Aesthetic Effects
Chlorine, Taste and odor, Particulates, etc.
RO-membrane
NSF / ANSI Standard 58:
Reverse Osmosis Drinking Water Treatment Systems
TDS, Cr(III), Cr(VI), Cd, Nitrate, etc.
Plus Inno-Sense
NSF / ANSI Standard 42:
Drinking Water Treatment Units – Aesthetic Effects
Chlorine, Taste and odor, Particulates, etc.
NSF / ANSI Standard 53:
Drinking Water Treatment Units – Health Effects
Cyst, lead, VOCs, MTBE, etc.
| Water Filtration | |
| Filter Cartridge | STEP 1) `11 Sediment 20μm STEP 2) `11 Neo-sense (Sediment + Pre-Carbon) STEP 3) `11 RO (Reverse Osmosis Membrane) STEP 4) `11 Inno-sense (Post-Carbon + Fine) |
| Flow rate/ Production Rate | 40 gpd (189.2 lpd)40 gpd (189.2 lpd) |
| Filter Life | Sedi 5,20μm : 6 Months Neo-sense : 6 Months Nanotrap : 24 Months Inno-sense : 6 Months |
| Tank Capacity|Ambient | 1.58 gal (6 ℓ) |
| Feed Water Pressure | 40~120psi (275kPa~827kPa) |
| Feed Water Temperature | 41℉~95℉ (5℃~35℃) |
| Dimensions(W X D X H) | 9.25 X 13.75 X 16.5 inch (235 X 350 X 419 mm) |
| Net Weight | 14.3 ℓb (6.5 kg) |
Related Products
Under the sink RO Filtration
Features
- All-in-one under sink system
- Non-electric product
Dimensions(W X D X H)
13.8 X 8.7 X 16.4 inch
Tank Capacity | Ambient
4.4 gal
Reviews
There are no reviews yet.